|
|
|
|
|
|
6.1L Hemi Aluminum Replacement Block
|
|
|
New for 2010 - Aluminum 6.1L/GEN III Hemi blocks from Mopar Performance. Available in three versions, these new blocks weigh approximately 100 pounds less than the production cast iron versions. Most production 6.1L Hemi components will interchange with these blocks. Increased wall thickness allows for bore sizes up to 4.185" thus allowing 400" - 500" displacements (depending on stroke). These new blocks are perfect for production LX/LC vehicles along with resto-mod projects.
--------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
6.1L SRT8 Hemi Crate Engine
|
|
|
Factory production 6.1L SRT-8 Hemi crate engine.
This is a complete engine assembly for replacing a factory 6.1L
Includes:
Intake Manifold
Throttle Body
Oil Pan
Exhaust Manifolds
Wiring Harness (factory not conversion harness)
|
|
|
|
|
|
|
|
|
|
Z-Bracket For Billet Tech Catch Can
|
Our Price: $25.00
|
|
|
The Billet Technology Z Bracket Mount allows you to have easier access to your catch can bottom to empty it.
Manufactured from domestic certified, solid 6061-T6 aircraft aluminum.
The Product Fits The Following Vehicles:
•2005-2008 Dodge Magnum 5.7L & 6.1L Engines
•2006-2012 Dodge Charger 5.7L, 6.1L & 6.4L Engines
•2008-2012 Dodge Challenger 5.7L, 6.1L, & 6.4L Engines
•2005-2012 Chrysler 300 5.7L, 6.1L, and 6.4L Engines
•2006-2012 Jeep Grand Cherokee SRT8 6.1L & 6.4L Engines
Catch Can Not Included
|
|
|
|
|
|
|
|
|
|
Mopar 6.1L Intake Manifold Gaskets, 6.1L Intake Pan Gasket
|
|
Our Price: $49.99
|
|
|
Mopar 6.1L Intake Manifold Gaskets, 6.1L Intake Pan Gasket
|
|
|
|
|
|
|
|
|
|
Dodge Hemi 5.7/6.1L flywheel bolt kit
|
|
Our Price: $49.99
|
|
|
Dodge Hemi 5.7/6.1L flywheel bolt kit
|
|
|
|
|
|
|
|
|
|
Mopar 6.1L Head Gaskets, Set of 2
|
|
Our Price: $69.99
|
|
|
Mopar 6.1L Head Gaskets, Set of 2
|
|
|
|
|
|
|
|
|
|
Billet Technology Oil Catch Cans
|
|
Our Price: $95.00
|
|
|
These catch cans by Billet Technology are used to keep oil from entering the intake tract to help keep your vehicle running at its best. Designed to provide the best flow and filtration, these catch cans feature a divided and baffled top with an oil separation element on each side. For ease of emptying, each catch can features a knurled bottom.
.
Universal Fit
2.6L 3.5L 5.7L 6.1L
--------------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
HEMI 5.7 and 6.1 Crank Pin Drill Fixture Kit
|
|
Our Price: $109.99
|
|
|
Crank Pin Drill Fixture for LX and LC
--------------------------------------------------------------------------------
The ATI Crank Pin Drill Fixture Kit for the HEMI 5.7L and 6.1L Super Damper allows you to install 1 or 2 dowel pins into your HEMI crank. This will greatly increase the strength of your crank assembly and eliminate damper twist on the shaft. The crank may be drilled and the pin installed without removing the engine from your LX or LC. This is a great addition for any HEMI engine used in circle track racing or supercharged applications!
|
|
|
|
|
|
|
|
|
|
Mopar 6.1L HEMI Camshaft
|
|
Our Price: $139.99
|
|
|
OEM Mopar stock 6.1L HEMI Camshaft (take out)
|
|
|
|
|
|
|
|
|
|
Manley Pushrods 02-06 5.7L HEMI
|
|
Our Price: $149.99
|
|
|
Knowledgeable engine builders will tell you that valve springs are among the most critically important components of any engine. You should know that Manley's new NexTek ? valve springs are designed and manufactured for optimum consistency, run after run, lap after lap. They are proven to have less load loss than other springs on the market, exhibiting superior fatigue life and enhancing than other springs on the market, exhibiting superior fatigue life and enhancing valvetrain stability valvetrain stability. Ever . Everything that counts in winning races.
•Cup and tip pushrods and ball end pushrods manufactured of 1010 steel
•Swedged end pushrods manufactured of 4130 chrome moly
•All pushrods are heat treated and black oxide finished
|
|
|
|
