Boosted High-powered stroker? Want more peace of mind than just a Boost-a-pump can offer?
Well this is the answer for you!
This kit allows allows you to run two Walbro 255lph High Pressure fuel pumps inside the factory fuel pump basket allowing you to retain OEM reliability and functionality of the level sending unit.
The kit includes:
•Walbro 255lph HP fuel pump (2)
•Filter •Fuel pump sleeve
•Dorman OE line with couplers
•Dual pump mounting bracket and the billet passenger side fuel hat.
Fuel lines exit passenger side of tank.
Please call if you have questions about this product. *
Note: Minor clearance adjustment of the bottom of the basket is required and wiring modifications to run the two high output Welbro pumps.
Please look close at all pictures and call or email if you have questions. A OEM style plastic flex line for ease of installation and improved reliability.
Electrical: Grounds: There are (2) 1/4-20 screws on the passenger hat that are for all grounds.
You will have to get a length of wire to run from driver side to ground pumps.
Use the 1/4-20 at top of hat to run a ground to battery.
Power: Use the two factory leads that were used for power and ground on the original pump as (2) separate power leads for each pump.
It is also recommended to use the single power lead from the car harness as a trigger lead for a 40 amp relay to run the pumps. It is also recommended to use individual circuit breakers or fuses for both pumps.
Contact: Dave Weber dave@modernmuscleperformance.com 276-666-1934
