|
|
|
|
|
|
6.1 Hemi Vehicle Specific Plate System pre-fabricated hard lines
|
Our Price: $29.99
|
|
|
6.1 Hemi Vehicle Specific Plate System pre-fabricated hard lines. (Includes Nitrous and Fuel Lines to Plate)
2 of Part Number 00-01551-B will be needed to connect Solenoids to Hardlines.
|
|
|
|
|
|
|
|
|
|
Nitrous Outlet Blow Down Tube Kit
|
|
Our Price: $29.99
|
|
|
A Blow-Down tube is designed to vent any nitrous that may purge from your nitrous bottle's relief valve to the outside atmosphere, keeping the flammable gas out of the drivers compartment. The tube replaces your bottle's standard pressure relief valve 'cap'. Made in the USA.
|
|
|
|
|
|
|
|
|
|
Nitrous Outlet Blow Off Caps
|
|
Our Price: $32.99
|
|
|
NHRA rules require the safety blow off to be routed outside the vehicle. This fitting replaces the existing safety blow off fitting and allows you to attach a blow down tube to the safety blow off fitting. Fits lightning 45 bottle valve and NX chrome bottle valves with female threads. Disk not included. For chrome valves, use with a new disk (part# 11712). When used with a lightning 45 valve (black), reuse the existing disk in the valve
|
|
|
|
|
|
|
|
|
|
Nitrous Outlet Progressive Controller
|
|
Our Price: $209.99
|
|
|
Nitrous Outlet Digital Progressive Controller with built in window safety switch, tps activation, gear lock out features and automatic lean cut.
Nitrous Outlet's Progressive Contoller is an affordable, compact, and easy to use controller.
Will easily fit into small spaces giving you more flexibility in install options.
Hi amp continuous duty circuits.
No computer needed!
Adjust Start % and Build Time.
Reset option for clutch cars.
40 amp capable draw.
2 independent RPM activation and RPM deactivation.
1 progressive channel
Lean cut off feature (wideband required).
TPS activation for falling signal, rising signals, low voltage signals, irregular signals and mechanical wide open throttle.
Multi Gear lock Out Feature allows delaying the stage from activation.
Can be used as a progressive controller only or use all controller features.
Ground & Hot Output wires allow multiple accessory activations for use with timing retards, indication lights etc.
Digital Hand Held Controller with LED read out for ease of programming and diagnosis, Conforms Vehicle RPM, Shows wide open throttle activation, shows gear lock out status, and shows activation status.
|
|
|
|
|
|
|
|
|
|
Nitrous Outlet 80mm 5.7 & 6.1 EFI Hemi Plate Conversion
|
|
Our Price: $259.99
|
|
|
This conversion kit comes complete with plate o-ring gasket, bolts, washers, and jetting from 50-200hp.
This Plate Conversion works with the 5.7 and 6.1 Hemi
|
|
|
|
|
|
|
|
|
|
Nitrous Outlet 85mm 5.7 & 6.1 EFI Hemi Plate Conversion
|
|
Our Price: $289.99
|
|
|
This conversion kit comes complete with plate, paper gasket, bolts, washers, and jetting from 50-200hp.
This Plate Conversion works with the 5.7 and 6.1 Hemi that has had the intake manifold opening bored to 85mm.
|
|
|
|
|
|
|
|
|
|
Nitrous Outlet Universal Dual Nozzle Dry Kit (No Bottle)
|
|
Our Price: $379.99
|
|
|
Nitrous Outlet Universal Dual Nozzle Dry Kit (No Bottle)
Nitrous Outlet Universal Dual Nozzle Dry Kit (No Bottle)
50-100-150Hp Jetting
System includes 400+Hp ( Limited Lifetime Warranty ) solenoid, 500Hp 1/16th NPT nitrous nozzle's, 20ft 4an main feed line, Stainless steel quick release bottle brackets, universal solenoid bracket, bottle nut, 4 an bottle nipple, 40/60 amp relay with harness, wot switch, all hardware and electrical.
Made In The USA!
|
|
|
|
|
|
|
|
|
|
Nitrous Outlet Dodge EFI Race SN System w/ 10lb Bottle
|
|
Our Price: $629.99
|
|
|
Dodge EFI Race Single Nozzle System with 10lb Bottle
35-50-100-150-200-250Hp Jetting
System includes 400+Hp ( Limited Lifetime Warranty ) solenoids, 250Hp 1/8th nitrous nozzle, 16ft 4an main feed line, Stainless steel quick release bottle brackets, universal solenoid brackets, bottle nut, 4 an bottle nipple, 40/60 amp relay with harness, wot switch, all hardware and electrical.
Made In The USA!
|
|
|
|
|
|
|
|
|
|
Nitrous Outlet Dodge EFI Single Nozzle System w/10lb Bottle
|
|
Our Price: $699.99
|
|
|
All Dodge EFI Single Nozzle System (35-150 hp) with 10lb Bottle
35-50-100-150Hp Jetting
System includes 400+Hp ( Limited Lifetime Warranty ) solenoids, 250Hp 1/8th nitrous nozzle, 16ft 4an main feed line, Stainless steel quick release bottle brackets, universal solenoid brackets, bottle nut, 4 an bottle nipple, 40/60 amp relay with harness, wot switch, all hardware and electrical.
Made In The USA
|
|
|
|
|
|
|
|
|
|
Nitrous Outlet 6.1L 80mm Hemi Vehicle Specific Plate System (No Bottle)
|
|
Our Price: $709.99
|
|
|
Nitrous Outlet 6.1L 80mm Hemi Vehicle Specific Plate System (No Bottle)
Nitrous Outlet 6.1 Hemi Vehicle Specific Plate System without a Bottle
50-100-150-200Hp Jetting
System includes 400+Hp ( Limited Lifetime Warranty ) solenoids, 80mm Dodge Plate, 80mm Hemi Vehicle Specific solenoid bracket, Hemi Vehicle Specific Hardlines, 16ft 4an main feed line, Stainless steel quick release bottle brackets, universal solenoid brackets, bottle nut, 4 an bottle nipple, 40/60 amp relay with harness, wot switch, all hardware and electrical.
Made In The USA!
|
|
|
|
