|
|
|
|
|
|
Brake-Control Package, 2011-12 Mustang V6/GT/GT 500 (Line Lock)
|
Our Price: $269.95
Sale Price: $259.95
You save $10.00!
|
|
|
An SLP exclusive, our BRAKE CONTROL PACKAGE is designed to fit the 2011-12 Mustang V6/GT/GT 500 and is developed as a "true bolt-on" package, no custom fabrication, no wire harness nightmare and no hardware store runs, no other kit offers this ease of installation and convenience period !!!
This kit is custom fitted for the Mustang chassis and is fully compatible with the factory anti-lock braking and traction-control systems. Each package includes a waterproof electrical solenoid, an activation switch, and complete plug-in harness, CNC-bent steel lines with correct OEM compatible fittings, necessary mounting hardware, and detailed installation instructions.
Here's how it works; press the brake pedal and flip the brake-control solenoid switch. Remove your foot from the pedal, and the solenoid maintains line pressure to the front brakes until the switch is released. This makes it easy to heat the rear tires while minimizing wear and tear on your car's rear brake components. You can also use the system to prevent a manual-trans car from rolling out of the staging beams at the starting line.
NOTE: Designed for racing only and requires bleeding of brake lines.
|
|
|
|
|
|
|
|
|
|
Supercharger Pulley, 2007-10 Mustang GT 500 (2.70)
|
Our Price: $99.95
Sale Price: $259.95
|
|
|
One of the easiest ways to pump up the power of your supercharged 2007-10 Mustang Shelby GT 500 is to increase the factory boost level. SLP's 2.70" blower pulley provides approximately 3 additional psi of boost, resulting in gains of up to 35 rear-wheel horsepower, but not at the cost of reliability or durability. It's made from powder-coated ductile iron for maximum durability and features extra-deep grooved ribs to eliminate belt slippage. Retains use of the factory serpentine belt.
NOTE: SLP STRONGLY recommends use of a hand-held programmer or custom tuning for 2007-2010 GT 500's.
NOTE: Also recommended is Part #M10012 Supercharger Pulley tool package for proper installation of pulley (conventional 3-plung pullers will NOT work).
|
|
|
|
|
|
|
|
|
|
2011 Mustang BBK Power-Plus Cold Air Intake
|
Our Price: $399.99
Sale Price: $349.99
You save $50.00!
|
|
|
Features:
- BBK Power-Plus Cold Air Intake Systems inject your motor with a shot of excitement
- Custom designed for your exact engine
- Dyno tested to produce an average of 7-21 extra horsepower (varies by vehicle)
- BBK builds your Power-Plus Cold Air Intake System from choice aluminum for the ideal blend of strength and lighter weight
- Comes with a conical-shaped cotton gauze filter that gobbles up oxygen as it strips away impurities
- Select vehicles can choose between polished, silver, and charcoal finishes
- Your BBK Power-Plus Cold Air Intake Systems comes with all mounting hardware and installation instructions
- 1-year warranty
|
|
|
|
|
|
|
|
|
|
2011 Mustang Edelbrock E-Force Supercharger
|
Our Price: $7,169.95
Sale Price: $6,599.99
You save $569.96!
|
|
|
- Complete E-Force Supercharger Kit #1588
Produces 559 HP and 503 ft/lbs or torque at the flywheel
- Features
Get instant, reliable and safe horsepower with the Edelbrock E-Force Supercharger Kit
Bolt-on installation—no cutting or modification needed
- Fits under the factory hood and cowl—nobody knows it’s there ‘til they find out the hard way
- OEM fit and finish looks like a factory installation
Features the Eaton TVS® Rotor assembly (the same unit used by GM on the Corvette ZR1)
- Roots style twin-screw design
Low boost system makes for minimal engine stress
- Self-contained oil system with 100,000 mile service interval (no drilling or plumbing required)
- Includes high-flow MAF sensor (depends on model)
- Integrated bypass valve makes for little to no decrease in fuel economy
- Complete package includes everything you need to supercharge your vehicle
Includes electronic PCM programming module—loaded with tuning specific to your vehicle
- 50-state emissions legal
Crafted in the USA for absolute quality control and top performance
- Your Edelbrock E-Force Supercharger Kit is backed by a 1-year warranty
|
|
|
|
|
|
|
|
|
|
Magna Charger Supercharger Kits 2011 Mustang
|
Our Price: $6,999.95
Sale Price: $6,750.00
You save $249.95!
|
|
|
Features
- Supercharge your vehicle’s power & performance with the Magna Charger Supercharger Kit
- Bolt-on installation requires no major modifications
Fits under the factory hood and cowl—no cutting or trimming needed
- Features the legendary Eaton® front inlet TVS supercharger unit
Roots-style rotor design delivers massive power across the entire RPM range
- 180° rotation provides straight airflow path for maximum power and efficiency
- Internal bypass valve makes for outstanding drivability and MPG
100% complete with all components necessary for installation
- Also includes a hand-held programmer to recalibrate the factory ECU for the supercharger system
- Proprietary intercooler airflow technology keeps things cool
- DIY installation can be done in less than a day
- Your Magna Charger Supercharger Kit is backed by a 3-year limited warranty
- Supercharger is in a Black powder coating finish
|
|
|
|
